Product Description
The Warmup Inscreed Cable System is designed for use within a screeded floor construction. The variable spacing of the cable available during design and installation allows the system power to be tailored to the properties requirements.
The Inscreed Cable system is extremely versatile. Its spacing can be varied to tailor the heat input into a floor to match its required heat load. This makes it ideal for screeds as thin as 50mm laid over insulation when a responsive system is required, as well as thicker, bonded screeds where the floor construction is to be used as a storage heater.
For retrofit installations where the subfloor is already in place, it is recommended that one of the other Warmup Electric UFH Systems is selected based on requirements. They can all be installed directly between an insulation layer and the floor finish layer to create a system with a very quick response to heating demands.
Technical Specifications
Operating Voltage: 220 – 240V, 50Hz
IP Rating: IPX7
Cable Thickness: 6mm
Average Output Rating: 100 to 210w/M²
Inner Insulation: ETFE
Outer Insulation: PVC
Min. Installation Temp: 5°C
Connection: 3m Long "Coldtail" Connection